Dirt Devil Navigator Manuel de service télécharger pdf (Page 51)

6 After each use

6.1 Transport and storage

 Always carry the appliance carefully; ide-

ally use both hands.

 Always store the appliance in its original

packaging in a cool, dry place, and keep it

out of reach of children.

6.2 Emptying the dust bin module

1. Ensure that the appliance is switched off

(no LED is lit).

2. Remove the robot's upper cover (Fig. 23).

It might be necessary to press firmly

(Fig. 23/arrows) to release the cover from

its locked position.

3. Carefully pull the dust bin module out of

the appliance (Fig. 24).

4. Remove the dust bin cover (Fig. 26).

5. Take out the filter (Fig. 27).

6. Tap lightly to knock out both parts and re-

move coarser debris with your hand.

7. If dust bin and filter can no longer be com-

pletely emptied through this measure, pro-

ceed as described under ZChapter 6.3,

"Cleaning dust bin and filter".

8. Insert the filter back into the bin (Fig. 27)

and put the dust bin cover back on

(Fig. 28).

9. Insert the dust bin module back into the

appliance (Fig. 24) and put on the upper

cover (Fig. 25). It will audibly snap into

place.

CAUTION:

Never store the appliance next to heat

sources (e.g. heater, oven). Avoid exposing

it to direct sunlight. Heat can damage the

appliance.

NOTE:

It is best to empty the dust bin module after

each vacuuming session. However, empty

the dust bin module at the latest

 Once a month,

 Prior to a longer period of non use,

 Prior to shipping.

M608.book Seite 51 Donnerstag, 1. August 2013 11:43 23

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 89 90

Commentaires sur ces manuels

Pas de commentaire

Dirt Devil Navigator Manuel de service Page 51

Commentaires sur ces manuels